AdvantageAirCUT_01
Home | GEN III Aircon | The Human Component | Technical Specifications | Technical Product Data | Contact Us
AdvantageAirCUTgenIII_01
AdvantageAirCUTgenIII_07
AdvantageAirCUTgenIII_08
AdvantageAirCUTgenIII_10
AdvantageAirCUTgenIII_12
AdvantageAirCUTgenIII_14
AdvantageAirCUTgenIII_16
AdvantageAirCUTgenIII_18
AdvantageAirCUTgenIII_20
AdvantageAirCUTgenIII_22
AdvantageAirCUTgenIII_24
AdvantageAirCUTgenIII_26
AdvantageAirCUTgenIII_28

The Gen III Ducted Air Conditioning Difference



Unlike standard systems, Gen III gives you unprecedented control and heating and cooling comfort as energy efficiently as possible.

Making Gen III one of the most energy efficient air conditioning systems available. It achieves this holy grail of air-conditioning, because:


1. Each room is zoned individually.

 

As rooms are not grouped together as they are in conventional systems, you only need to condition the zones you are using, greatly reducing running costs.


2. Every room has its own temperature sensor.


Unlike other multi-zone ducted heating cooling systems that need you to turn zones on and off, Gen III has a temperature sensor in every room so they manage themselves automatically. This allows you to set a different temperature for each room, or a consistent temperature throughout your home, and the system will accurately maintain your selected temperature, regardless of a room•s use, or orientation to the sun.


3. Precise temperature control means you use less energy


Because there•s no energy wasted over-conditioning rooms, the Gen III is 26% more energy efficient ducted air conditioning system than single thermostat systems.

4. No dump zone


Gen III does not need to use one of your rooms as a dump zone as it cleverly recycles any excess conditioned air through the system which boosts performance and gets the job done faster when you are only conditioning 1 or 2 rooms. This leads to lower running costs, and importantly, eliminates the discomfort caused by over-conditioning a designated dump zone.


5. Extensive scheduling


Save energy by setting your system to go on before your house gets too hot or cold. Gen III has a simple
24 hour timer, or you can manually schedule up to 16 instructions to allow you to program a week in advance.


6. Easy to use colour touch screen


The entire system is controlled by a colour touch screen that offers a very user-friendly way to operate the system. You can even customise preset favourites so you can set the required conditions for every room with a single touch.


 

HOW GEN III AIR CONDITIONING WORKS


genIII1_01 Temperature Control Touch Screen genIII1_03 Master Control Unit Snsors in each room genIII1_06 genIII1_07 genIII1_08
 

1. You select the temperature you want for each of the rooms in use via the colour touch screen.

2. Sensors in each room measure the temperature and pass the information to the Master Control Unit.

3. The Master Control Unit. Unit collates all the information and then sends messages to motors attached to Exact Air Regulators in the ducting to control the airflow. As the rooms reach the desired temperature they automatically close. When the last room reaches temperature the system turns off.

 
 
PREVIOUS PAGE
AdvantageAirCUTgenIII_03
AdvantageAirCUTgenIII_06
AdvantageAirCUTgenIII_09
AdvantageAirCUTgenIII_11
AdvantageAirCUTgenIII_13
AdvantageAirCUTgenIII_15
AdvantageAirCUTgenIII_17
AdvantageAirCUTgenIII_19
AdvantageAirCUTgenIII_21
AdvantageAirCUTgenIII_23
AdvantageAirCUTgenIII_25
AdvantageAirCUTgenIII_27
AdvantageAirCUTgenIII_29

 

Two story Experts


Why multi-story
homes need multi- thermostat systems
?

Twostory1

Single thermostat air conditioning systems in two story homes don•t
add up. That•s because there is
nowhere that you can place a
thermostat that will give you
an accurate temperature reading
for the entire home. (Remember high school science? Hot air rises.)

As the thermostat controls the
system and determines how much
conditioned air is generated,
standard systems have to work
on an average temperature
for the entire house.
As a result, they end up
sending too much air to the naturally cooler downstairs and east
facing rooms, and not enough
to the warmer west facing and
upstairs rooms.

The result? Hot and cold spots throughout the house.

 
 

 
The Gen III solution; temperature sensors in every room

Twostory2

In single story homes
or two-story homes, the only way you can get an accurate temperature reading for every room is to have a temperature sensors in every room.

It seems obvious, but only the Gen III ducted air conditioning system does it. In total, you can have up to 32 temperature sensors • enough for even the largest of homes.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
NEXT PAGE
 
 

Home | GEN III Aircon | The Human Component | Technical Specifications | Technical Product Data | Contact Us | Sitemap

AdvantageAirCUTgenIII_32

Website developed by: 9923.602